Recently, MH&W entered into a partnership with a Japanese company to act as our agent in Japan to locate bobbins and hardware and handle all negotiations as well as export control. We can now announce that with our partnership, MH&W will have access to most of the original TDK tooling. We have identified the tooling …
Nesscap Ultrapacitors has just released a new whitepaper describing Ultracapacitors and their use in Wind Power Turbine Generators. Read the full document here.
New TP-S30 thermal interface pads from MH&W International provide 3.0 W/mK of thermal conductivity between hot components and heat sinks at lower costs than competing gap filler materials. Pads of TP-S30 thermal gap fillers are soft and compliant for easy compression and filling of air gaps between mounting surfaces to optimize heat transfer. Applications for …
The ferrite industry has been affected by an extreme shortage of product in 2010. This is primarily due to an increase in ferrite consumption in Asia. We have seen ferrite manufacturers either discontinue their 15K permeability ferrite or highly restrict the manufacturing of this extreme material. (15K perm material is very difficult to make and …
Recent Design Win with Major Wind Nacelle Manufacturer Celebrated in Mahwah MH&W International, Corp. is celebrating yet another design win by extending the life of bearings in wind turbine generator drives. A major manufacturer of wind turbine generators has recently awarded MH&W International, Corp. a contract to supply Magnetec Cool Blue Nanocrystalline cores for all …
TDK-EPC (magnetic group of TDK Corporation) has announced the intention to discontinue the manufacture of all bobbins and mounting hardware currently being supplied by MH&W International Corp. MH&W will accept orders for the bobbins and mounting hardware as a last time buy. All orders must be submitted to MH&W no later than June 10, 2010. …
MH&W International has added new TP-S3LS ultra-low silicone gap fillers to its line of thermal interface materials. TP-S3LS pads contain less than 50 parts per million of silicone while providing 3.0 W/mK of themal conductivity between hot components and their heat sinks. The gap filler’s minimal silicone content makes it suitable for use in silicone-sensitive …
Mahwah, NJ — MH&W International has introduced Keratherm® KL 90 highly thermally conductive, double-sided adhesive tape which provides 1.4 W/mK of thermal conductivity – nearly three times higher than other thermal tapes – for more effective heat transfer from hot components to heat sinks. The new tape’s thermal impedance is just 208°C-mm2/W (0.32°K-in2/W). Keratherm KL …
MH&W International has introduced Keratherm U 90 thermal interface material, manufactured by Kerafol, for use where contamination concerns prohibit the use of silicone-based thermal pads, but where high levels of thermal conductivity are needed for sufficient thermal transfer in hot electronic devices. U 90 material consists of a ceramic-filled polyurethane film with thermal conductivity of …
Knowing Your Application Needs is Key to Picking the Best TIM As component powers continue to grow, so do their cooling requirements. One rule of thumb says that for every 10°C rise of the junction temperature the failure rate doubles. Thus, there is an urgent need to remove heat from hot chips to the surrounding …