Mahwah, NJ — MH&W International has introduced Keratherm® KL 90 highly thermally conductive, double-sided adhesive tape which provides 1.4 W/mK of thermal conductivity – nearly three times higher than other thermal tapes – for more effective heat transfer from hot components to heat sinks. The new tape’s thermal impedance is just 208°C-mm2/W (0.32°K-in2/W). Keratherm KL …
MH&W International has introduced Keratherm U 90 thermal interface material, manufactured by Kerafol, for use where contamination concerns prohibit the use of silicone-based thermal pads, but where high levels of thermal conductivity are needed for sufficient thermal transfer in hot electronic devices. U 90 material consists of a ceramic-filled polyurethane film with thermal conductivity of …
Knowing Your Application Needs is Key to Picking the Best TIM As component powers continue to grow, so do their cooling requirements. One rule of thumb says that for every 10°C rise of the junction temperature the failure rate doubles. Thus, there is an urgent need to remove heat from hot chips to the surrounding …
MH&W International Corp. has launched a new blog to focus on the Thermal Interface materials (TIM’s) industry. Like most high tech industries, new innovations, new products and new innovative solutions are constantly appearing. We at MH&W will try to help engineers, designers, manufacturers and suppliers connect to keep abreast of industry news and to help …