MH&W International has added new TP-S3LS ultra-low silicone gap fillers to its line of thermal interface materials. TP-S3LS pads contain less than 50 parts per million of silicone while providing 3.0 W/mK of themal conductivity between hot components and their heat sinks. The gap filler’s minimal silicone content makes it suitable for use in silicone-sensitive …
Mahwah, NJ — MH&W International has introduced Keratherm® KL 90 highly thermally conductive, double-sided adhesive tape which provides 1.4 W/mK of thermal conductivity – nearly three times higher than other thermal tapes – for more effective heat transfer from hot components to heat sinks. The new tape’s thermal impedance is just 208°C-mm2/W (0.32°K-in2/W). Keratherm KL …
MH&W International has introduced Keratherm U 90 thermal interface material, manufactured by Kerafol, for use where contamination concerns prohibit the use of silicone-based thermal pads, but where high levels of thermal conductivity are needed for sufficient thermal transfer in hot electronic devices. U 90 material consists of a ceramic-filled polyurethane film with thermal conductivity of …
Knowing Your Application Needs is Key to Picking the Best TIM As component powers continue to grow, so do their cooling requirements. One rule of thumb says that for every 10°C rise of the junction temperature the failure rate doubles. Thus, there is an urgent need to remove heat from hot chips to the surrounding …
MH&W recently joined the American Wind Energy Association (AWEA) to further their expanding knowledge of the rapidly growing wind turbine industry. In the past three years MH&W has become the supplier of components used to extend the life of bearings used in wind turbine systems, core materials for inverters and inductors, and conversion to the …
Bill Wilson – Magnetics National Sales Manager MH&W International Announce New Hire Ms. Telicia Craft as National Sales Team Member Mahwah, NJ March 1, 2010 – We are pleased to announce that Telicia Craft has officially joined MH&W! “Ms. Craft will support and grow our traditional power market, as well as our new Renewable Energy …
MH&W International Corp. has launched a new blog to focus on the Thermal Interface materials (TIM’s) industry. Like most high tech industries, new innovations, new products and new innovative solutions are constantly appearing. We at MH&W will try to help engineers, designers, manufacturers and suppliers connect to keep abreast of industry news and to help …